Landscape Lighting in York Region

Most outdoor lighting we get called to fix was installed by a landscaper, not an electrician. The fixtures are fine, but the wire is undersized, the connections aren't weatherproofed, and after one Ontario winter the splices corrode out. Tim does it properly: dedicated 120V feed from the panel, sealed weatherproof transformer, direct-burial cable, the right wire gauge for the run length so the lights at the far end aren't dimmer than the ones near the house.

Before & after

What we replace. What we leave.

What we typically find

• Existing landscape lighting half-dead from corroded connections
• Dark walkway or steps — safety hazard
• Want uplighting on trees or the front of the house
• Security lighting around side gates and back yard
• Want phone control instead of a wall timer

What Tim leaves

Landscape Lighting done to code. ESA-permitted, inspected, passed first visit.

Recent Work

What landscape lighting looks like.

Real jobs across York Region. ESA-permitted, inspected, passed first time.

How We Build It

Walk the property, then design it.

Tim walks the property with you — once during the day, once at dusk — to figure out what you want lit and where the dark spots actually are. We map out fixture placement, transformer location, and the trench run from the panel. Installation is direct-burial cable to code depth, gel-filled wire nuts at every connection, weatherproof transformer, and a smart controller so you set the schedule from your phone. We turn the system on at dark and walk it together to make sure every fixture is aimed right.

FAQ

Common questions